Development of Camera Fault Analysis System Using Visualization of Electrical Analysis Flow
Keywords:
working systems, flowcharts, analysis systemsAbstract
This research aims to develop and increase the efficiency of a system for analyzing electrical and mechanical failures of cameras by using the method of creating a flow chart of the system for analyzing camera malfunctions and creating a website to manage the database system. The proposed method is used to solve the problem of the lack of a systematic process for analyzing or inspecting camera failures, resulting in a delay in analyzing camera failures. The flowchart design of the system for analyzing camera failures divides them into two types: electrical failures and mechanical failures. The data collection method for the total number of cameras with defects is compared with the number of cameras and the time required to analyze the cameras after using the developed system flowchart. The results of the study found that after using the proposed system, the number of cameras that can analyze electrical camera failures increased by 25.15 percent, and the time required for analysis was reduced by 36 minutes per failure analysis of a camera body. The number of cameras that can analyze mechanical camera failures increased by 26.52 percent, and the analysis time was reduced by 20 minutes per camera failure diagnosis. The results of the numbers were checked again using the numbers that were forwarded to other departments as well. It can be seen that using the flowchart for analyzing camera failures presented can increase the number of camera failures analyzed. It can also reduce the time it takes to analyze the camera’s condition.
References
Chaiwat, K., & Aphichat, C. (2022). The productivity improvement of bottled water manufacturing using work study technique. Journal of Manufacturing and Management Technology, 1(1), 1-8. (in Thai)
Denkena, B., Dengler, B., Doreth, K., Krull, C., & Horton, G., (2014). Interpretation and optimization of material flow via system behavior reconstruction. Production Engineering Research Develelovement, 8, 659-668. https://doi.org/10.1007/s11740-014-0545-z
Genius, C. (2023). Flowchart, operational planning format. Retrieved from https://codegeniusacademy.com/flowchart/
Geek, G. (2018). Database system. Retrieved from https://www.glurgeek.com/education/
Mingketar, (2022). Site structure. Retrieved from https://mingketar.co.th/website-structure/
Pathompong, H., & Chakrapan, K. (2012). Lean production efficiency increasing: A case study of water pump manufacturing factory. Hasem Bundit Engineering Journal, 2(2), 40-62 (in Thai)
Pydimarry, S. S., & Rao, V. B. S. (2023). Enhancing productivity using flow process charts and value stream mapping. Advances in Engineering Research Proceedings of the Second International Conference on Emerging Trends in Engineering (ICETE 2023), 2023, 1138-1149. doi: 10.2991/978-94-6463-252-1_114.
Sanook. (2022). Principles of operation of cameras. Retrieved from https://guru.sanook.com/2574/
Surachet, M., & Athakorn, K. (2018). Development of a database system for managing spare parts in engineering and maintenance department: A case study in coil center industry. The Journal of KMUTNB, 28(3), 547-555. doi:10.14416/j.kmutnb.2018.06.001 (in Thai)
Winner, T. (2020). What is a flow chart?-Flowchart writing. Retrieved from https://thaiwinner.com/flow-chart/
Wiyasing, T. (2024). Achievement study of using the system flowchart according to the principles of contract amendment. Journal of Bansomdej Engineering and Industrial Technology, 4(2), 27–39. (in Thai)
