เครื่องอัดกระถางจากขยะอินทรีย์ขนาดเล็กแบบกึ่งอัตโนมัติ
คำสำคัญ:
การลดก๊าซเรือนกระจก, ขยะอินทรีย์, ความยั่งยืน, เครื่องอัดกระถางกึ่งอัตโนมัติ, เส้นใยมะพร้าวบทคัดย่อ
การศึกษาวิจัยครั้งนี้มีวัตถุประสงค์เพื่อออกแบบและสร้างเครื่องอัดกระถางจากขยะอินทรีย์ขนาดเล็กแบบกึ่งอัตโนมัติ เพื่อเป็นทางเลือกในการจัดการขยะออร์แกนิกในมหาวิทยาลัยและลดการปล่อยก๊าซเรือนกระจก เครื่องจักรถูกออกแบบโดยใช้โครงสร้างเหล็ก ANSI MC/C ที่มีความแข็งแรงสูง สามารถรับแรงกดได้สูงสุด 12.27 ตัน โดยมีลักษณะเด่นคือขนาดกะทัดรัด เคลื่อนย้ายสะดวก และสามารถถอดประกอบได้ ส่วนด้านความแข็งแรงสามารถทนแรงกดได้ตามวัตถุประสงค์ มีต้นทุนต่อเครื่อง 45,000 บาท ผลการทดสอบประสิทธิภาพการขึ้นรูปพบว่า เส้นใยมะพร้าว เป็นวัสดุที่เหมาะสมที่สุด โดยสภาวะที่เหมาะสมในการอัด คือ อุณหภูมิ 120°C แรงดัน 110.32 bar (1600 psi) และใช้เวลาอัด 90 วินาที ซึ่งให้ผลิตภัณฑ์ที่ยึดเกาะแน่น รูปทรงสมบูรณ์ และไม่มีรอยไหม้ จากการประเมินผลโดยผู้เชี่ยวชาญพบว่าตัวเครื่องมีความเหมาะสมด้านการออกแบบและการใช้งานในระดับดี ด้วยค่าเฉลี่ย 4.44 (SD=0.56) ขณะที่ผลการประเมินจากผู้ใช้งานจริงจากผู้เชี่ยวชาญและนักศึกษาให้คะแนนความพึงพอใจเฉลี่ย 4.51 และ 4.45 (SD=0.60 และ 0.66) โดยระบุว่า ตัวเครื่องมีคู่มือการใช้งานที่เข้าใจง่ายและมีความคุ้มค่าต่อการลงทุน นวัตกรรมนี้ช่วยเพิ่มมูลค่าให้กับเศษวัสดุเหลือทิ้ง เช่น ใบตองและใยมะพร้าว แต่ยังเป็นโมเดลที่มีประสิทธิภาพในการจัดการขยะอย่างเป็นระบบและลดผลกระทบต่อสิ่งแวดล้อมในสถานศึกษาได้อย่างยั่งยืน
เอกสารอ้างอิง
Boonchouytan, W., Homkhiew, C., & Cheewawuttipong, W. (2021). The development of splitting flesh and fibers palmyra fruit machine [In Thai]. Wichcha Journal Nakhon Si Thammarat Rajabhat University, 40(1), 76–90. https://li01.tci-thaijo.org/index.php/wichcha/article/view/249835
Charungchittisunthorn, W. (2005). Theory & concept of design [In Thai]. Appa Printing Group.
Environmental and Landscape Work, Ubon Ratchathani Rajabhat University. (2023). Organic waste volume for 2023 [In Thai] [Unpublished raw data].
Homkhiew, C., Thammachot, N., & Boonchouytan, W. (2023). Development of biodegradable pots from wastes of cockle mushroom cultivation [In Thai]. Wichcha Journal Nakhon Si Thammarat Rajabhat University, 42(1), 77–92. https://doi.org/10.65217/wichchajnstru.2023.v42i1.256634
Keawpan, T.,Itsaranuwat, S., & Plangnok, J. (2020). Principles and concepts in product design. Journal of Humanities and Social Sciences Surin Rajabhat University, 22(2), 161-182. https://so03.tci-thaijo.org/index.php/jhssrru/article/view/248733/168903
Kaewphuang, P., & Iamtumrat, T. (2021). The development of a waste sorting model at building 3 [In Thai] [Bachelor’s thesis, Ubon Ratchathani Rajabhat University]. Ubon Ratchathani Rajabhat University Library.
Maturasamontri, C., Saengsawang, C., Angthong, S., & Angboonta, P. (2006). Single screw oil press for plant seeds [In Thai]. Rajamangala University of Technology Thanyaburi.
Miengarrom, T., & Ketkaew, T. (2021). The development of molding machine for food packaging from natural materials [In Thai]. Dhonburi Rajabhat University.
Nimsamer, C. (2011). Composition of art [In Thai]. Amarin.
Sawaiamon, A., Khotmanee, W., & Muangjaroen, S. (2023). The design and construction of a shape-shifter compression machine with rice straw [In Thai]. Journal of Science and Technology Thonburi University, 7(1), 78–87. https://ph03.tci-thaijo.org/index.php/trusci/article/view/693
Siampressure.com. (2023). The common unit of pressure measurement is PSI (pounds per square inch) [In Thai]. https://siampressure.com/psi-pressure-unit/
Suwanarat, Y., Masong, P., & Chanphong, T. (2021). Development of a molding tool for pot forming and production of plant pots from oil palm male inflorescences [In Thai]. Rajamangala University of Technology Phra Nakhon.
Tantrabandit, M. (2002). Materials engineering (9th ed.) [In Thai]. Technology Promotion Association (Thailand-Japan).
