Effect of Pulpal Pressure and Immediate or Delayed Dentin Sealing Technique on Microtensile Bond Strength of an Adhesive Resin Cement to Dentin: An In Vitro Study

Main Article Content

Teeranuch Rujirakanusorn
Marisa Sukapattee
Sitthichai Wanachantararak
Aikaterini Kostagianni

Abstract

Objectives: To evaluate the effect of pulpal pressure and immediate (IDS) or delayed dentin sealing (DDS) technique on microtensile bond strength (μTBS) of an adhesive resin cement to exposed human dentin.


Methods: Fifty extracted human third molars were divided into 2 groups: pulpal and non-pulpal pressure (PP, NP), which represented vital and non-vital tooth. Each group was divided into 5 subgroups: direct restoration (control), DDS technique and 3 IDS techniques, [etch-and-rinse (TE), self-etching (SE) and universal adhesive (U)]. The hydrostatic pressure of 20 cmH2O was applied prior to adhesive application in PP groups during the experiment. The self-adhesive resin cement was used to bond a composite disc onto dentin for all groups. Ten small square beams from each group were fabricated and collected for μTBS testing and mode of failure monitoring.


Results: All three IDS groups yielded a significantly higher μTBS than control and DDS groups in both pulpal conditions. DDS groups yielded the lowest μTBS. The presence of pulpal pressure caused a significant reduction


of μTBS in TE and DDS groups.


Conclusions: The IDS technique could produce higher μTBS than the DDS and direct restoration technique in both pulpal conditions.

Article Details

How to Cite
Rujirakanusorn, T., Sukapattee , M. ., Wanachantararak, S. ., & Kostagianni , A. . (2021). Effect of Pulpal Pressure and Immediate or Delayed Dentin Sealing Technique on Microtensile Bond Strength of an Adhesive Resin Cement to Dentin: An In Vitro Study. Chiang Mai Dental Journal, 42(2), 97–103. Retrieved from https://he01.tci-thaijo.org/index.php/cmdj/article/view/248726
Section
Original article

References

Magne P. Immediate dentin sealing: a fundamental procedure for indirect bonded restorations. J Esthet Restor Dent 2005; 17(3): 144-154.

Magne P, Kim TH, Cascione D, Donovan TE. Immediate dentin sealing improves bond strength of indirect restorations. J Prosthet Dent 2005; 94(6): 511-519.

Magne P, So WS, Cascione D. Immediate dentin sealing supports delayed restoration placement. J Prosthet Dent 2007; 98(3): 166-174.

Duarte S, Jr., de Freitas CR, Saad JR, Sadan A. The effect of immediate dentin sealing on the marginal adaptation and bond strengths of total-etch and self-etch adhesives. J Prosthet Dent 2009; 102(1): 1-9.

Hironaka NGL, Ubaldini ALM, Sato F, Giannini M, Terada RSS, Pascotto RC. Influence of immediate dentin sealing and interim cementation on the adhesion of indirect restorations with dual-polymerizing resin cement. J Prosthet Dent 2018; 119(4): 678.e1-.e8.

Brigagao VC, Barreto LFD, Goncalves KAS, et al. Effect of interim cement application on bond strength between resin cements and dentin: Immediate and delayed dentin sealing. J Prosthet Dent 2017; 117(6): 792-798.

Sailer I, Oendra AE, Stawarczyk B, Hammerle CH. The effects of desensitizing resin, resin sealing, and provisional cement on the bond strength of dentin luted with self-adhesive and conventional resincements. J Prosthet Dent 2012; 107(4): 252-260.

Giannini M, Takagaki T, Bacelar-SÁ R, et al. Influence of resin coating on bond strength of self-adhesive resin cements to dentin. Dent Mater J 2015; 34: 822-827.

Pashley EL, Comer RW, Simpson MD, Horner JA, Pashley DH, Caughman WF. Dentin permeability: sealing the dentin in crown preparations. Oper Dent 1992; 17(1): 13-20.

Santana VB, de Alexandre RS, Rodrigues JA, Ely C, Reis AF. Effects of Immediate Dentin Sealing and Pulpal Pressure on Resin Cement Bond Strength and Nanoleakage. Oper Dent 2016; 41(2): 189-199.

Choi Y-S, Cho I-H. An effect of immediate dentin sealing on the shear bond strength of resin cement to porcelain restoration. J Adv Prosthodont 2010; 2(2): 39-45.

van den Breemer CR, Ozcan M, Pols MR, Postema AR, Cune MS, Gresnigt MM. Adhesion of resin cement to dentin: effects of adhesive promoters, immediate dentin sealing strategies, and surface conditioning. Int J Esthet Dent 2019; 14(1): 52-63.

Elgalaid TO, Youngson CC, McHugh S, Hall AF, Creanor SL, Foye RH. In vitro dentine permeability: the relative effect of a dentine bonding agent on crown preparations. J Dent 2004; 32(5): 413-421.

Sauro S, Pashley DH, Montanari M, et al. Effect of simulated pulpal pressure on dentin permeability and adhesion of self-etch adhesives. Dent Mater 2007; 23(6): 705-713.

Hashimoto M, Ito S, Tay FR, et al. Fluid movement across the resin-dentin interface during and after bonding. J Dent Res 2004; 83(11): 843-848.

Hashimoto M, Tay FR, Sano H, Kaga M, Pashley DH. Diffusion-induced water movement within resin-dentin bonds during bonding. J Biomedical Mater Res B Appl Biomater 2006; 79(2): 453-458.

Feitosa VP, Correr AB, Correr-Sobrinho L, Sinhoreti MA. Effect of a new method to simulate pulpal pressure on bond strength and nanoleakage of dental adhesives to dentin. J Adhes Dent 2012; 14(6): 517-524.

Pereira PN, Okuda M, Sano H, Yoshikawa T, Burrow MF, Tagami J. Effect of intrinsic wetness and regional difference on dentin bond strength. Dent Mater 1999; 15(1): 46-53.

Qanungo A, Aras MA, Chitre V, Mysore A, Amin B, Daswani SR. Immediate dentin sealing for indirect bonded restorations. J Prosthodont Res 2016; 60(4): 240-249.

Kumar PS, Vasunni GK, Krishnan D. Effect of immediate dentin sealing in prevention of postcementationhypersensitivity in fullcoverage restorations. J Appl Dent Med Sci 2015; 14(5): 80-84.

Papacchini F, Dall'Oca S, Chieffi N, et al. Composite-to-composite microtensile bond strength in the repair of a microfilled hybrid resin: effect of surface treatment and oxygen inhibition. J Adhes Dent 2007; 9(1): 25-31.

Prati C, Pashley DH, Montanari G. Hydrostatic intrapulpal pressure and bond strength of bonding systems. Dent Mater 1991; 7(1): 54-58.

Perdigão J. Dentin bonding as a function of dentin structure. Dent Clin North Am 2002; 46(2): 277-301.

Toledano M, Osorio R, Ceballos L, et al. Microtensile bond strength of several adhesive systems to different dentin depths. Am J Dent 2003; 16(5): 292-298.

Hiraishi N, Nishiyama N, Ikemura K, et al. Water concentration in self-etching primers affects their aggressiveness and bonding efficacy to dentin. J Dent Res 2005; 84(7): 653-658.

Hiraishi N, Yiu CK, King NM, Tay FR. Effect of pulpal pressure on the microtensile bond strength of luting resin cements to human dentin. Dent Mater 2009; 25(1): 58-66.

Bacchi A, Abuna G, Babbar A, Sinhoreti MA, Feitosa VP. Influence of 3-month simulated pulpal pressure on the microtensile bond strength of simplified resin luting systems. J Adhes Dent 2015; 17(3): 265-271.

Frankenberger R, Lohbauer U, Taschner M, Petschelt A, Nikolaenko SA. Adhesive luting revisited: influence of adhesive, temporary cement, cavity cleaning, and curing mode on internal dentin bond strength. J Adhes Dent 2007; 9(2): 269-273.

Takimoto M, Ishii R, Iino M, et al. Influence of temporary cement contamination on the surface free energy and dentine bond strength of self-adhesive cements. J Dent 2012; 40(2): 131-138.

Porntharukchareon A, Sukapattee M, Rungsiyakull P. Effect of residual eugenol from temporary cement after various cleansing methods in different time on shear bond strength of self-etch adhesive resin cement. CM Dent J 2020; 41(3): 75-87.

Van Meerbeek B, De Munck J, Yoshida Y, et al. Buonocore memorial lecture. Adhesion to enamel and dentin: current status and future challenges. Oper Dent 2003; 28(3): 215-235.

Sauro S, Mannocci F, Toledano M, Osorio R, Thompson I, Watson TF. Influence of the hydrostatic pulpal pressure on droplets formation in current etch-and-rinse and self-etch adhesives: A video rate/TSM microscopy and fluid filtration study. Dent Mater 2009; 25(11): 1392-1402.

Tay FR, Pashley DH. Aggressiveness of contemporary self-etching systems: I: Depth of penetration beyond dentin smear layers. Dent Mater 2001; 17(4): 296-308.

Yoshida Y, Yoshihara K, Nagaoka N, et al. Self-assembled Nano-layering at the Adhesive interface. J Dent Res 2012; 91(4): 376-381.

Hebling J, Castro FL, Costa CA. Adhesive performance of dentin bonding agents applied in vivo and in vitro. Effect of intrapulpal pressure and dentin depth. J Biomedical Mater Res B Appl Biomater 2007; 83(2): 295-303.

Lin A, McIntyre NS, Davidson RD. Studies on the adhesion of glass-ionomer cements to dentin. J Dent Res 1992; 71(11): 1836-1841.

Perdigão J, Sezinando A, Monteiro PC. Laboratory bonding ability of a multi-purpose dentin adhesive. Am J Dent 2012; 25(3): 153-158.

Yoshihara K, Yoshida Y, Hayakawa S, et al. Nanolayering of phosphoric acid ester monomer on enamel and dentin. Acta Biomater 2011; 7(8): 3187-3195.

Muñoz MA, Luque I, Hass V, Reis A, Loguercio AD, Bombarda NH. Immediate bonding properties of universal adhesives to dentine. J Dent 2013; 41(5): 404-411.