Dental CAD/CAM System and Clinical Applications
Article Sidebar
Main Article Content
Abstract
The objective of this article is to provide an overview of dental CAD/CAM system and clinical applications. As new technology and materials science have evolved, computers are increasingly becoming a part of dentistry and prosthodontics, such as CAD/CAM dentistry. There are materials for processing by CAD/CAM devices including metal, composite and ceramic. Depending on the location of the components of the CAD/CAM systems, three different production concepts are available; In-office/Chairside system, Laboratory based system and Milling center system. All CAD/CAM systems consist of three components include scanner, design software and production technology. In the clinical application, CAD/CAM generated dental restorations provide high mechanical properties and acceptable marginal gap. Low failure rate and high survival rate have also been reported. However, to date, the production of CAD/CAM systems require high investment and specialist training.
Article Details
References
Miyazaki T, Hotta Y, Kunii J, Kuriyama S, Tamaki Y. A review of dental CAD/CAM: current status and future perspectives from 20 years of experience. Dent Mater J 2009; 28(1): 44-56.
Santos Jr GC, Santos Jr M, Rizkalla AS, Madani D, El-Mowafy O. Overview of CEREC CAD/CAM chairside system. Gen Dent 2013; 61(1): 36-40.
Davidowitz G, Kotick PG. The use of CAD/CAM in dentistry. Dent Clin North Am 2011; 55(3): 559-570.
Yin L, Song X-F, Song Y-L, Huang T, Li J. An overview of in vitro abrasive finishing & CAD/CAM of bioceramics in restorative dentistry. Int J Mach Tool Manu 2006; 46(9): 1013-1026.
Nakamura T, Dei N, Kojima T, Wakabayashi K. Marginal and internal fit of Cerec 3 CAD/CAM all-ceramic crowns. Int J Prosthodont 2003; 16(3): 244-248
Tsitrou EA, Northeast SE, van Noort R. Brittleness index of machinable dental materials and its relation to the marginal chipping factor. J Dent 2007; 35(12): 897-902.
Shearer A, Heymann HO, Wilson N. Two ceramic materials compared for the production of CEREC inlays. J Dent 1993; 21(5): 302-304.
Frankenberger R, Sindel J, Krämer N, Petschelt A. Dentin bond strength and marginal adaptation: direct composite resins vs ceramic inlays. Oper Dent 1999; 24: 147-155.
Beuer F, Schweiger J, Edelhoff D. Digital dentistry: an overview of recent developments for CAD/CAM generated restorations. Br Dent J 2008; 204(9): 505-511.
Thornton I. Mechanical properties of dental resin composite CAD/CAM blocks. Dent Mater J 2014; 33(5): 705-710.
Li RWK Chow TW, Matinlinna JP. Ceramic dental biomaterials and CAD/CAM technology: state of the art. J Prosthodont Res 2014; 58(4): 208-216.
Otto T, De Nisco S. Computer-aided direct ceramic restorations: a 10-year prospective clinical study of Cerec CAD/CAM inlays and onlays. Int J Prosthodont 2002; 15(2): 122-128.
Terry DA. CAD/CAM Systems, Materials, and Clinical Guidelines for All’Ceramic Crowns and Fixed Partial Dentures. Compend Contin Educ Dent 2002; 23(7): 637-641.
Klim J, Corrales EB. Innovation in Dentistry: CAD/CAM Restorative Procedures. Available at: http://www.cadstar.org/system/files/private/documents/
CADStar%20Klim%20Innovation%20in%20Dentistry.pdf. Accessed May 27, 2016.
Otto T, Schneider D. Long-term clinical results of chairside Cerec CAD/CAM inlays and onlays: a case series. Int J Prosthodont 2008; 21(1): 53-59.
Wiedhahn K, Kerschbaum T, Fasbinder D. Clinical long-term results with 617 Cerec veneers: a nine-year report. Int J Comput Dent 2005; 8(3): 233-246.
Otto T. Computer-aided direct all-ceramic crowns: preliminary 1-year results of a prospective clinical study. Int J Periodontics Restorative Dent 2004; 24(5): 446-455.
Mörmann WH, Dentb M. An up to 5-year clinical evaluation of posterior in-ceram CAD/CAM core crowns. Int J Prosthodont 2002; 15(5): 451-456.
Güth J-F, Keul C, Stimmelmayr M, Beuer F, Edelhoff D. Accuracy of digital models obtained by direct and indirect data capturing. Clin Oral Investig 2013; 17(4): 1201-1208.
Prajapati A, Prajapati A, Mody DR, Choudhary AB. Dentistry Goes Digital: A Cad-Cam Way-A Review Article. IOSR-JDMS 2014; 13(8): 53–59.
Mou S-H, Chai T, Wang J-S, Shiau Y-Y. Influence of different convergence angles and tooth preparation heights on the internal adaptation of Cerec crowns. J Prosthet Dent 2002; 87(3): 248-255.
Beuer F, Edelhoff D, Gernet W, Naumann M. Effect of preparation angles on the precision of zirconia crown copings fabricated by CAD/CAM system. Dent Mater J 2008; 27(6): 814-820.
Renne W, Wolf B, Kessler R, McPherson K, Mennito AS. Evaluation of the marginal fit of CAD/CAM crowns fabricated using two different chairside CAD/CAM systems on preparations of varying quality. J Esthet Restor Dent 2015; 27(4): 194-202.
Euán R, Figueras-Álvarez O, Cabratosa-Termes J, Oliver-Parra R. Marginal adaptation of zirconium dioxide copings: influence of the CAD/CAM system and the finish line design. J Prosthet Dent 2014; 112(2): 155-162.
Re D, Cerutti F, Augusti G, Cerutti A, Augusti D. Comparison of marginal fit of Lava CAD/CAM crown-copings with two finish lines. Int J Esthet Dent 2013; 9(3): 426-435.
Contrepois M, Soenen A, Bartala M, Laviole O. Marginal adaptation of ceramic crowns: a systematic review. J Prosthet Dent 2013; 110(6): 447-454.
Giannetopoulos S, van Noort R, Tsitrou E. Evaluation of the marginal integrity of ceramic copings with different marginal angles using two different CAD/CAM systems. J Dent 2010; 38(12): 980-986.
Hung SH, Hung K-S, Eick JD, Chappell RP. Marginal fit of porcelain-fused-to-metal and two types of ceramic crown. J Prosthet Dent 1990; 63(1): 26-31.
Weaver JD, Johnson GH, Bales DJ. Marginal adaptation of castable ceramic crowns. J Prosthet Dent 1991; 66(6): 747-753.
Ng J, Ruse D, Wyatt C. A comparison of the marginal fit of crowns fabricated with digital and conventional methods. J Prosthet Dent 2014; 112(3): 555-560.
Sato T, Al Mutawa N, Okada D, Hasegawa S. A clinical study on abutment taper and height of full cast crown preparations. J Med Dent Sci 1998; 45(3): 205-210.
Manhart RH. Longevity of Restorations in Posterior Teeth and Reasons for Failure. J Adhes Dent 2001 ;3(1): 45-64.
Wittneben J-G, Wright RF, Weber H-P, Gallucci GO. A systematic review of the clinical performance of CAD/CAM single-tooth restorations. Int J Prosthodont 2009; 22(5): 466-471.
Guess PC, Strub JR, Steinhart N, Wolkewitz M, Stappert CF. All-ceramic partial coverage restorations—midterm results of a 5-year prospective clinical splitmouth study. J Dent 2009; 37(8): 627-637.
Kokubo Y, Tsumita M, Sakurai S, Suzuki Y, Tokiniwa Y, Fukushima S. Five‐year clinical evaluation of In‐Ceram crowns fabricated using GN‐I (CAD/CAM) system. J Oral Rehabil 2011; 38(8): 601-607.