Effect of 10-MDP-containing Primers and Adhesives on the Micro-shear Bond Strength Between Self-adhesive Resin Cement and Zirconia
Article Sidebar
Main Article Content
Abstract
The purpose of this study was to evaluate the micro-shear bond strength between RelyX™ Unicem resin cement and zirconia after treated with different universal primers and adhesives. Thirty cylindrical-shaped zirconia were embedded into metal mold and polished. The specimens were randomly divided into six groups and surface treated with different universal primers and adhesives. RelyX™ Unicem resin cement was then cemented on to each specimen by injecting the cement into cylindrical-shaped polyethylene tube which was 0.8 millimeter in diameter and 0.5 millimeter in height. Four tubes were fixed on one specimen. As a result, there were 4 resin cement rods on each specimen and 20 rods in each group (n=20). All specimens were stored in distilled water at 37˚C for 24 hours. The micro-shear bond strength test was performed. The mode of failure was inspected under stereomicroscope. The result showed that the highest micro-shear bond strength was found in specimen treated with Single Bond Universal™ adhesive (24.90±2.50 MPa). Micro-shear bond strength of the groups treated with Clearfil™ S3 Universal Bond (22.34±2.00 MPa) and Clearfil™ Ceramic Primer Plus (22.17±1.59 MPa) were higher than that of groups treated with Alloy Primer (17.98±1.66 MPa) and Cesead N Opaque Primer (17.94±1.81 MPa). Every experimental group showed significantly higher micro-shear bond strength than control group (15.89±2.27 MPa).
Article Details
References
Shenoy A, Shenoy N. Dental ceramics: An update. J Conserv Dent 2010; 13: 195-203.
Gracis S, Thompson VP, Ferencz JL, Silva NR, Bonfante EA. A new classification system for all-ceramic and ceramic-like restorative materials. Int J Prosthodont 2015; 28: 227-235.
Larsson C, Wennerberg A. The clinical success of zirconia-based crowns: a systematic review. Int J Prosthodont 2014; 27: 33-43.
Raigrodski AJ, Hillstead MB, Meng GK, Chung KH. Survival and complications of zirconia-based fixed dental prostheses: a systematic review. J Prosthet Dent 2012; 107: 170-177.
Sailer I, Makarov NA, Thoma DS, Zwahlen M, Pjetursson BE. All-ceramic or metal-ceramic tooth-supported fixed dental prostheses (FDPs)? A systematic review of the survival and complication rates. Part I: Single crowns (SCs). Dent Mater 2015; 31: 603-623.
Agustin-Panadero R, Roman-Rodriguez JL, Ferreiroa A, Sola-Ruiz MF, Fons-Font A. Zirconia in fixed prosthesis: a literature review. J Clin Experimental Dent 2014; 6: 66-73.
Christel P, Meunier A, Heller M, Torre JP, Peille CN. Mechanical properties and short-term in-vivo evaluation of yttrium-oxide-partially-stabilized zirconia. J Biomed Mater Res 1989; 23: 45-61.
Tinschert J, Natt G, Hassenpflug S, Spiekermann H. Status of current CAD/CAM technology in dental medicine. Int J Comput Dent 2004; 7: 25-45.
Özcan M, Bernasconi M. Adhesion to zirconia used for dental restorations: a systematic review and meta-analysis. J Adhes Dent 2015; 17: 7-26.
Ferracane JL, Stansbury JW, Burke FJ. Self-adhesive resin cements - chemistry, properties and clinical considerations. J Oral Rehabil 2011; 38: 295-314.
Tzanakakis EG, Tzoutzas IG, Koidis PT. Is there a potential for durable adhesion to zirconia restorations? a systematic review. J Prosthet Dent 2016; 115: 9-19.
Thammajaruk P, Inokoshi M, Chong S, Guazzato M. Bonding of composite cements to zirconia: A systematic review and meta-analysis of in vitro studies. J Mech Behav Biomed Mater 2018; 80: 258-268.
Nagaoka N, Yoshihara K, Feitosa VP, et. a. Chemical interaction mechanism of 10-MDP with zirconia. Sci Rep 2017; 7: 455-463.
Alex G. Universal adhesives: the next evolution in adhesive dentistry? Compend Contin Educ Dent 2015; 36: 15-26
de Souza G, Hennig D, Aggarwal A, Tam LE. The use of MDP-based materials for bonding to zirconia. J Prosthet Dent 2014; 112: 895-902.
Capa N, Ozkurt Z, Canpolat C, Kazazoglu E. Shear bond strength of luting agents to fixed prosthodontic restorative core materials. Aust Dent J 2009; 54: 334-340.
Luthy H, Loeffel O, Hammerle CH. Effect of thermocycling on bond strength of luting cements to zirconia ceramic. Dent Mater 2006; 22: 195-200.
Zorzin J, Belli R, Wagner A, Petschelt A, Lohbauer U. Self-adhesive resin cements: adhesive performance to indirect restorative ceramics. J Adhes Dent 2014; 16: 541-546.
Chuang SF, Kang LL, Liu YC, Lin JC, Wang CC, Chen HM, et al. Effects of silane and MDP-based primers application orders on zirconia-resin adhesion; a ToF-SIMS study. Dent Mater 2017; 33: 923-933.
Yang B, Barloi A, Kern M. Influence of air-abrasion on zirconia ceramic bonding using an adhesive composite resin. Dent Mater 2010; 26: 44-50.
Chen Y, Lu Z, Qian M, Zhang H, Xie H, Chen C. Effect of 10-methacryloxydecyl dihydrogen phosphate concentration on chemical coupling of methacrylate resin to yttria-stabilized zirconia. J Adhes Dent 2017; 19: 349-355.
Llerena-Icochea AE, Costa RM, Borges A, Bombonatti J, Furuse AY. Bonding polycrystalline zirconia with 10-MDP-containing adhesives. Oper Dent 2017; 42: 335-341.
Pereira Lde L, Campos F, Dal Piva AM, Gondim LD, Souza RO, Ozcan M. Can application of universal primers alone be a substitute for airborne-particle abrasion to improve adhesion of resin cement to zirconia? J Adhes Dent 2015; 17: 169-174.
Magne P, Paranhos MP, Burnett LH. New zirconia primer improves bond strength of resin-based cements. Dent Mater 2010; 26: 345-352.
Kaimal A, Ramdev P, Shruthi CS. Evaluation of effect of zirconia surface treatment, using plasma of argon and silane, on the shear bond strength of two composite resin cements. J Clin Diagn Res 2017; 11: 39-43.
Özcan M, Nijhuis H, Valandro LF. Effect of various surface conditioning methods on the adhesion of dual-cure resin cement with MDP functional monomer to zirconia after thermal aging. Dent Mater 2008; 27: 99-104.