The Effects of Universal Adhesives on Zirconia/ Resin Composite Shear Bond Strength Universal adhesives
Article Sidebar
Main Article Content
Abstract
The aim of this study was to evaluate the effects of different universal adhesives on zirconia/resin composite shear bond strength. Three universal adhesives [Single Bond Universal (SU), G-Premio bond (GP) and Optibond Universal (OU)], one zirconia primer [Alloy primer (AP)] and one adhesive [Single bond II (SB)] were used in this study. Zirconia disks (6 mm diameter, 4 mm thick) were prepared and embedded in dental gypsum. Specimens were polished and alumina sandblasted for micromechanical retention. The samples were randomly divided into seven groups (N=20 in each group) according to zirconia surfaces treatments for chemical bond: Group1 (No tx), Group2 (AP), Group3 (SB), Group4 (AP+SB), Group5 (SU), Group6 (GP) and Group7 (OU). An Ultradent template (2 mm diameter, 2 mm thick) was placed on top of treated zirconia surface. The resin composite was filled into the mold and then light-cured for 40 seconds. All bonded specimens were kept in distilled water at 37oC for 24 hours and they were subjected to shear bond strength measurement using a universal testing machine at a crosshead speed of 0.5 mm/min. The data were statistically analyzed using one-way ANOVA and Tukey’s test (α=0.05). The shear bond strengths of Group1 to Group 7 were 3.35(1.87), 16.29(2.05), 9.84(2.21), 24.05(1.66), 23.73(2.00), 23.47(2.52) and 22.91(2.19) MPa, respectively. The bond strengths of Group4-7 were significantly higher than those of Group1-3 (p<0.05). However, Group1 showed the lowest bond strength (p<0.05). In conclusion, the universal adhesive may be alternative to the zirconia primer for zirconia surface treatment before repair with resin composite.
Article Details
บทความ ข้อมูล เนื้อหา รูปภาพ ฯลฯ ที่ได้รับการลงตีพิมพ์ในวิทยาสารทันตแพทยศาสตร์ มหาวิทยาลัยขอนแก่นถือเป็นลิขสิทธิ์เฉพาะของคณะทันตแพทยศาสตร์ มหาวิทยาลัยขอนแก่น หากบุคคลหรือหน่วยงานใดต้องการนำทั้งหมดหรือส่วนหนึ่งส่วนใดไปเผยแพร่ต่อหรือเพื่อกระทำการใด ๆ จะต้องได้รับอนุญาตเป็นลายลักษณ์อักษร จากคณะทันตแพทยศาสตร์ มหาวิทยาลัยขอนแก่นก่อนเท่านั้น
References
Piconi C, Maccauro G. Zirconia as a ceramic biomaterial. Biomaterials 1999;20(1):1-25.
Denry I, Kelly J. State of the art of zirconia for dental applications. Dent Mater 2008;24(3):299-307.
Sailor I, Gottnerb J, Kanelb S, Hammerle C. Randomized controlled clinical trial of zirconia-ceramic and metal- ceramic posterior fixed dental prostheses: 3-year follow-up. Int J Prosthodont 2009;22(6):553-60.
Dogan S, Raigrodski AJ, Zhang H, Mancl LA. Prospective cohort clinical study assessing the 5-year survival and success of anterior maxillary zirconia-based crowns with customized zirconia copings. J Prosthet Dent 2017; 117(2):226-32.
Rinke S, Gersdorff N, Lange K, Roediger M. Prospective Evaluation of Zirconia Posterior Fixed Partial Dentures: 7-Year Clinical Results. Int J Prosthodent 2013;26(2): 164-71.
Larsson C, Vult von Steyern P. Five-Year Follow-up of Implant-Supported Y-TZP and ZTA Fixed Dental Prostheses. A Randomized, Prospective Clinical Trial Comparing Two Different Material Systems. Int J Prosthodent 2010; 23(6):555-61.
Kim MJ, Oh SH, Kim JH, Ju SW, Seo DG, Jun SH, et al. Wear evaluation of the human enamel opposing different Y-TZP dental ceramics and other porcelains. J Dent 2012; 40(11):979-88.
Torres SM, Borges GA, Spohr AM, Cury AA, Yadav S, Platt JA. The effect of surface treatments on the micro-shear bond strength of a resin luting agent and four all-ceramic systems. Oper Dent 2009;34(4):399-407.
Wandscher VF, Fraga S, Pozzobon JL, Soares FZ, Foletto EL, May LG, et al. Tribochemical Glass Ceramic Coating as a New Approach for Resin Adhesion to Zirconia. J Adhes Dent 2016;18(5):435-40.
Sriamporn T, Thamrongananskul N, Busabok C, Poolthong S, Uo M, Tagami J. Dental zirconia can be etched by hydrofluoric acid. Dent Mater J 2014;33(1):79-85.
de Souza G, Hennig D, Aggarwal A, Tam LE. The use of MDP-based materials for bonding to zirconia. J Prosthet Dent 2014;112(4):895-902.
Kitayama S, Nikaido T, Takahashi R, Zhu L, Ikeda M, Foxton RM, et al. Effect of primer treatment on bonding of resin cements to zirconia ceramic. Dent Mater 2010;26(5): 426-32.
Koizumi H, Nakayama D, Komine F, Blatz MB, Matsumura H. Bonding of resin-based luting cements to zirconia with and without the use of ceramic priming agents. J Adhes Dent 2012;14(4):385-92.
Tanis MC, Akay C, Karakis D. Resin cementation of zirconia ceramics with different bonding agents. Biotechnology & biotechnology equipment 2015;29(2):363-7.
Kim JH, Chae SY, Lee Y, Han GJ, Cho BH. Effects of multipurpose, universal adhesive on resin bonding to zirconia ceramic. Oper Dent 2015;40(1):55-62.
Bulbul M, Kesim B. The effect of primers on shear bond strength of acrylic resin to different types of metals. J Prosthet Dent 2010;103(5):303-8.
Nima G, Ferreira PVC, de Paula AB, Consani S, Giannini M. Effect of metal primers on bond strength of a composite resin to nickel-chrome metal alloys. Braz Dent J 2017;28(2):210-5.
Yokota Y, Nishiyama N. Determination of molecular species of calcium salts of MDP produced through decalcification of enamel and dentin by MDP-based one-step adhesive. Dent Mater J 2015;34(2):270-9.
Amaral M, Belli R, Cesar PF, Valandro LF, Petschelt A, Lohbauer U. The potential of novel primers and universal adhesives to bond to zirconia. J Dent 2014;42(1):90-8.
Balkenhol M, Nothdurft FP, Hannig M, Schindler A, Lehmann A, Arnold T et al. Bonding to zirconia ceramic: the effect of cold plasma treatment and 4-META. Clin Plasma Med 2017;5–6:8-13.
Al Jeaidi ZA, Alqahtani MA, Awad MM, Rodrigues FP, Alrahlah AA. Bond strength of universal adhesives to air-abraded zirconia ceramics. J Oral Sci 2017;59(4):565-70.
Seabra B, Arantes-Oliveira S, Portugal J. Influence of multimode universal adhesives and zirconia primer application techniques on zirconia repair. J Prosthet Dent 2014;112(2):182-7.
Xie H, Li Q, Zhang F, Lu Y, Tay FR, Qian M, et al. Comparison of resin bonding improvements to zirconia between one-bottle universal adhesives and tribochemical silica coating, which is better? Dent Mater 2016;32(3): 403-11.
International Organization for Standardization. ISO/TR 11405 Dental materials-Guidance on testing of adhesion to tooth structure. Geneva:ISO;2003.
Lohbauer U, Zipperle M, Rischka K, Petschelt A, Müller FA. Hydroxylation of dental zirconia surfaces: characterization and bonding potential. J Biomed Mater Res B Appl Biomedmater 2008;87(2):461-7.
Han IH, Kang DW, Chung CH, Choe HC, Son MK. Effect of various intraoral repair systems on the shear bond strength of composite resin to zirconia. J Adv Prosthodont 2013;5 (3):248-55.
Celik G, Ismatullaev A, Sari T, Usumez A. Comparison of the effectiveness of bonding composite to zirconia as a repair method. Int J Appl Ceram Technnol 2016;13(2):405-11.
Ferreira da Silva DF, de Oliveira Lopes R, de Souza NC, Marcondes ML, Danesi P, Spohr AM. Bond to Zirconia Ceramic: Evaluation of Different Primers and a Universal Adhesive. Open Dent J 2018;12(1):929-36.